Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Old Depth Transducer and new ITC-5
08-30-17, 09:46 AM
Post: #4
RE: Old Depth Transducer and new ITC-5
Mark,

While I don't suspect that any damage may have occurred to the iTC-5, the difference in expected transducer frequency is likely responsible for the reported symptom. No adjustments for depth transducer frequency are supported/provided within this product. Per my initial response, It is recommended that the currently installed transducer be replaced with one of the analog instrument depth transducer's found Raymarine’s web site.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Old Depth Transducer and new ITC-5 - Chuck - Raymarine - Moderator - 08-30-17 09:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)