Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
connecting RS 150 to C60 MFD
08-30-17, 10:31 AM
Post: #1
connecting RS 150 to C60 MFD
Because of the location of the MFD and the RS 150 I need to splice a cable to the Seatalk cable connected to the MFD and then to the Seatalk\Seatalk ng converter cable which is connected to the convertor kit widget. I think I have that done correctly but the antennae isn't getting 12v (the LED on the top is dark). Any suggestions?
Find all posts by this user
Quote this message in a reply
08-30-17, 12:07 PM
Post: #2
RE: connecting RS 150 to C60 MFD
Welcome to the Raymarine Forum J34C,

Please note that Raymarine has never produced a MFD having the name C60. Should the MFD actually be a C70 or C80 C-Series Classic MFD, then a SeaTalk to SeaTalkng Converter Kit, not a SeaTalk to SeaTalkng Cable would be used to interface these two products to one another. Please click here to view a FAQ addressing how a C-Series Classic MFD would be interfaced to a Raystar 150 GPS Sensor.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)