The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Lighthouse III Oil Pressure Data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lighthouse III Oil Pressure Data
09-08-17, 10:18 AM
Post: #1
trush640 Offline
Junior Member
**
 		Posts: 6
Joined: Nov 2016
Reputation: 0
Lighthouse III Oil Pressure Data
Hi guys... I have an e127 and Axiom 12 RV installed on my helm. Both units are running the latest software available. I'm using a Mercury NMEA 2000 gateway to provide engine data to both MFDs.

On the e127, all engine data is present, including oil pressure. However, the Axiom is not showing oil pressure (see attached pics).

I've tried to edit the page to see if there are other oil pressure options available, however, the circular engine data graphic that contains the gears, oil, water, RPM info, does not appear to be editable.

Any thoughts or suggestions on how to get the Axiom to display oil pressure?

Thanks in advance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Lighthouse III Oil Pressure Data - trush640 - 09-08-17 10:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication