Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST70/SPX10 and Axiom 12 RV (v3.1.96)
09-11-17, 11:31 AM
Post: #1
ST70/SPX10 and Axiom 12 RV (v3.1.96)
After the update of v3.1.96 on the Axiom 12 RV I am no longer able to access the configuration screen (i.e. compass offset) of the autopilot on the ST70 when the Axiom 12 is powered on. If I power on the ST70 with the Axiom 12 powered off I am able to access the screen up until the time I power on the Axiom 12.
Find all posts by this user
Quote this message in a reply
09-12-17, 01:55 PM
Post: #2
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
Welcome to the Raymarine Forum Ruder,

The diagnostics feature of the ST70 Autopilot Control Head may be used to determine the software level within compatible SeaTalkng devices. What version of software is installed within the ST70 Autopilot Control Head? What version of software is installed within the SPX10.
Find all posts by this user
Quote this message in a reply
09-12-17, 02:47 PM (This post was last modified: 09-13-17 08:52 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
SPX10 v3.05
ST70 Pilot Head v3.04
Find all posts by this user
Quote this message in a reply
09-13-17, 09:38 AM
Post: #4
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
Ruder,

Thanks for the requested information within your two recent threads. Raymarine's engineering team will also be attempting to duplicate both of these issues. This and our your other thread will be updated with the engineering team's findings.
Find all posts by this user
Quote this message in a reply
09-13-17, 09:54 AM (This post was last modified: 09-13-17 09:58 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
Appreciate it Chuck! Neither of the issues really impact me that much and I absolutely love the Axiom! I posted both issues because I know Raymarine is still developing the Lighthouse III software and should at least be aware of the issues.

This weekend I am going to try swap the Actisense-NGW-1 with an Alltek NK-80 as it seems the NK-80 supports Bidirectional DSC sentences. I will let you know if removing the NGW-1 clears up either issue.
Find all posts by this user
Quote this message in a reply
09-19-17, 10:25 AM (This post was last modified: 09-19-17 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
Issue was fixed with latest software update (v3.2.86).
Find all posts by this user
Quote this message in a reply
09-19-17, 11:20 AM
Post: #7
RE: ST70/SPX10 and Axiom 12 RV (v3.1.96)
Thanks for the update to this thread.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)