The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST2000+ NMEA0183 Wifi Connectivity
09-15-17, 11:25 PM (This post was last modified: 07-22-19 09:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST2000+ NMEA0183 Wifi Connectivity
Hello!

I am trying to sync my ST2000+ with a NMEA Wifi interface I recently purchased so that I can control my ST2000+ via a 3rd party or navigation iOS application. My understanding was that the ST2000+ could communicate with NMEA, but after speaking with Madman Marine who has a remote control app for the ST2000+, said it requires SeaTalk for the remote control commands. Madman Marine have their own Wifi interface which apparently converts NMEA to Seatalk, but this was not the Wifi interface I purchased.

Any advice as to how I can get my ST2000+ to support remote control commands from an NMEA0183 Wifi interface? After searching the forums, it sounds like a Seatalk1 NMEA0183 converter is required, but looks like it is no longer being produced.

Any help is greatly appreciated!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST2000+ NMEA0183 Wifi Connectivity - SecondWind - 09-15-17 11:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)