European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
EV-150 issues
|
|
09-21-17, 07:35 PM
Post: #5
|
|||
|
|||
|
RE: EV-150 issues
Chuck,
Sorry, I was remiss in not mentioning that the interference was when we were tracking to a waypoint that I had placed on the Chartplotter. I wanted to see ihow well the Auto Pilot would track. It was then and only then did I notice the interference on the MFD screen.When in standby mode, the MFD was clear of any interference. I will add additional ferrites to the motor leads and to the ACU power leads and see if that corrects the issue. I mounted the EV-1 sensor core as far away from any electronics and magnetic fields (motors or compass) as I could . I will perform the Dockside and lineariazation again and hopefully that will bring the deviation back to a reasonable value. Failing all this, the boat will head into the shop for the expert's help. Thank you for all your guidance in the installation of the AutoPilot. Steve |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
EV-150 issues - stevea - 09-16-17, 12:49 PM
RE: EV-150 issues - Chuck - Raymarine - Moderator - 09-20-17, 03:01 PM
RE: EV-150 issues - stevea - 09-21-17, 02:30 PM
RE: EV-150 issues - Chuck - Raymarine - Moderator - 09-21-17, 03:20 PM
RE: EV-150 issues - stevea - 09-21-17 07:35 PM
RE: EV-150 issues - Oregoncme - 09-21-17, 10:03 PM
RE: EV-150 issues - Chuck - Raymarine - Moderator - 09-22-17, 07:55 AM
|
User(s) browsing this thread: 1 Guest(s)