Part 3 of leaking type 2 pump...

[skipgundlach]

Thanks, Steve,

We're triangulating in courtesy of HyPro, who indicate that the original supplier was GACO; it's a DPSM seal commonly noted as 8.16.7; we're still working on the shape (of which there are many).

As to the fittings, I think I understand you to say that the hoses were initially BSP ends, but you installed adapters making it BSP female/NPT male, and NPT, but NOT NPTF, right? At this minute I don't expect to need them, but I'd want to source them before opening the system to cap them. Or, might it be the reverse, and I'd just unscrew the adapter?

Thanks for your assistance.

L8R

Skip