Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar Results
10-09-17, 03:54 PM
Post: #2
RE: Radar Results
Welcome back to the Raymarine Forum PetrelMarine,

As you have suggested, the signal strength (SS) value is quite low and should be around 130. Oddly, the Gain value is zero, in spite of your reporting that Gain has been configured to Auto. It is recommended that you enter the advanced radar settings and command the radar to be reset (Open Radar page; MENU->RADAR SET-UP->ADVANCED RADAR SET-UP). Should the radar be operated with each of its settings configured to Auto and resetting the radar not address the problem, then there would appear to be a fault with the radome's circuitry. Should the currently installed radome be a 2D, 4D, RD218, or RD424, then it need to be replaced, as Raymarine can no longer provide parts and service for these radomes. When operating with the latest E-Series Classic MFD software, these MFDs are also compatible with HD Radomes (RD418HD & RD424HD) and Digital Radomes (retired).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Radar Results - PetrelMarine - 10-07-17, 05:50 PM
RE: Radar Results - Chuck - Raymarine - Moderator - 10-09-17 03:54 PM
RE: Radar Results - PetrelMarine - 10-09-17, 04:20 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)