Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SPX5 communicating to ST70
10-11-17, 10:21 AM (This post was last modified: 10-11-17 10:22 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: SPX5 communicating to ST70
Deb,

When using the SPX5 Autopilot Course Computer with a ST70 Autopilot Control Head, these two items should each be interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone ... as such, the backbone kit is required. The SPX5 Wheel Pilot was initially produced with a ST6002+ Autopilot Control Head and unfortunately, the currently posted documentation exclusively references this control head instead of the ST70 Autopilot Control Head ... this will soon change. The attached document addresses commissioning using the ST70 Autopilot Control Head.


Attached File(s)
.pdf  81287_1 Commissioning.pdf (Size: 1.16 MB / Downloads: 2392)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
SPX5 communicating to ST70 - Dkdoyle - 10-10-17, 12:47 PM
RE: SPX5 communicating to ST70 - Chuck - Raymarine - Moderator - 10-11-17 10:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)