Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL80C Plus Chartplotter
10-16-17, 06:51 AM
Post: #1
RL80C Plus Chartplotter
Hi,

I'm having trouble with this unit with display at certain zoom levels. For example; at 1.5 NM or at 12NM range, the display is correct. However, at 6NM, there is no display - just cross hatching. Any advice on how to get this working would be much appreciated.

thank you,

Tim Holley
Find all posts by this user
Quote this message in a reply
10-16-17, 08:40 AM
Post: #2
RE: RL80C Plus Chartplotter
Welcome to the Raymarine Forum Tim,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
11-26-17, 01:05 PM (This post was last modified: 11-27-17 11:03 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: RL80C Plus Chartplotter
Nov 26/17 Update:

In follow up to this, it turned out that having the RL80C software updated fixed the problem. It now has proper display on all zoom levels.
Find all posts by this user
Quote this message in a reply
11-27-17, 11:14 AM
Post: #4
RE: RL80C Plus Chartplotter
Tim,

Thanks for the update ... I'm glad to learn that the software update had the desired outcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)