Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom Side Vision
10-17-17, 01:46 PM
Post: #2
RE: Axiom Side Vision
Welcome to the Raymarine Forum gmckenzie,

Scan angle cannot be changed, as it is based upon the fixed angle of the transducers elements. That said, we may be able to make some suggestions. Would it be possible to have you provide two additional photos of the transom with the engine / drive positioned in the full down position. The first should be a photo of the full back side of the transom. The second photo should be looking across the transom at the height of the transducer from the right side looking toward the engine / drive (again, the engine / drive should be positioned in the full down position).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom Side Vision - gmckenzie - 10-16-17, 02:01 PM
RE: Axiom Side Vision - Chuck - Raymarine - Moderator - 10-17-17 01:46 PM
RE: Axiom Side Vision - gmckenzie - 10-20-17, 02:21 PM
RE: Axiom Side Vision - gmckenzie - 10-26-17, 10:38 AM
RE: Axiom Side Vision - gmckenzie - 10-30-17, 07:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)