Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TYPE 100 ECU AND P70R HEAD
05-02-20, 02:03 PM
Post: #1
TYPE 100 ECU AND P70R HEAD
Good afternoon.

I have an old sailboat that has the following equipment: ECU TYPE 100, with M81121 Type 2 Hydraulic Pump 12 V, the control head is the P70R, originally used the AUTOHELM 7000, but even using the seatalk to seatalkng converter I cannot access the settings for system calibration, on the p70r, could you give me a tip?
Find all posts by this user
Quote this message in a reply
05-06-20, 02:32 PM
Post: #2
RE: TYPE 100 ECU AND P70R HEAD
Hello ybojarczuk and welcome to the Raymarine forum,

The p70r does not have the ability to calibrate a type 100 course computer. The course computer would have to be at least a type 150/400 or be of the S1/2/3 series. In this case you would need to find a older control head that is compatible with the type 100 or upgrade the type 100 to a EV-1 and ACU400 to access the calibration.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)