Raytech Navigator Unable to Import/Export Waypoints

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum KnotEnoughBills,

The reported issue may be encountered when importing data directly from the CF memory card into RayTech RNS / Planner 6.1/6.2. The latter may often be worked around by the following procedure:
1. create a folder titled Archive within the root level directory of the computer's C: drive (e.g. c:\Archive)
2. copy the Archive.fsh file from the CF memory card to the Archive folder created within step 1 of this procedure
3. command RayTech to import waypoint & routes from a File, not from the card
4. when importing the data, the RayTech software should be configured such that the it is expecting that the file being imported is in C/E-Series Format.

Should the above specified procedure fail, then the reported issue would typically have resulted from a constraint failure within the data associated with one or more waypoints or routes. This problem may also result from corruption of the MFD's waypoint/route/track database. The latter may often be corrected via the following procedure:
1. export all waypoints, routes, and tracks to a CF memory card (creates a single file titled Archive.fsh with the root level directory of the CF memory card)
2. import all wayponts, routes, and tracks saved to the CF memory card in step 1 of this procedure. When notified that a duplicate waypoint, route, track, or waypoint group has been discovered, choose the option to overwrite ALL such duplicates.
3. delete the Archive.fsh file stored within the root level directory of the CF memory card
4. export all waypoints, routes, and tracks to a CF memory card ... the resulting Archive.fsh file should now be free of duplicate waypoints, routes, tracks, and waypoint groups.

Should these items not correct the reported issue, then it would be recommended that the Archive.fsh file be attached to this thread for further analysis.