Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SmartController & SeaTalkng
11-23-17, 08:09 PM
Post: #1
SmartController & SeaTalkng
I'm upgrading all my equipment and the only SeaTalk device left will be the SmartController Base Station. Everything else will be STng or NMEA2000. I will be using a SeaTalk-to-SeaTalkng convertor to connect the base station.

1. What is the LEN for the base station I should account for as I design a balanced SeaTalkng backbone?

2. The ferrite for the charging cable is missing. Where can I get a replacement for the correct one to use?

Find all posts by this user
Quote this message in a reply
11-28-17, 04:22 PM (This post was last modified: 11-28-17 04:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: SmartController & SeaTalkng
Welcome to the Raymarine Forum rsqunit,

1. Raymarine does not appear to have specified a LEN number for the SmartController's Base Station. That said, using a LEN value of 3 would be considered safe for the Base Station.

2. Snap Chokes are commonly available from electronics stores (ex. Radio Shack), Amazon, etc.. With respect to size, you need simply measure the cable's diameter.
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)