Raymarine forum / Raymarine Forums / Instruments v / ST290 Display (E22056)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST290 Display (E22056)
12-06-17, 07:29 AM
Post: #12
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: ST290 Display (E22056)
Hi,
Step 1 is fine, just make sure the ST290 part of the system is kept isolated from everything else, it will run fine as an isolated standalone system.

Step 2 is good too - still leaving the ST290 isolated

would recommend keping the RS130 and using the external GPS instead of the eS 97 internal one, make sure you turn the internal one off though and you have that as a back-up if there is ever an issue with the RS130.
thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST290 Display (E22056) - ddfour1 - 11-30-17, 11:28 AM
RE: ST290 Display (E22056) - ddfour1 - 12-01-17, 02:14 PM
RE: ST290 Display (E22056) - ddfour1 - 12-04-17, 11:02 AM
RE: ST290 Display (E22056) - ddfour1 - 12-05-17, 09:52 AM
RE: ST290 Display (E22056) - ddfour1 - 12-05-17, 03:39 PM
RE: ST290 Display (E22056) - Derek - Raymarine - Moderator - 12-06-17 07:29 AM
RE: ST290 Display (E22056) - ddfour1 - 12-06-17, 10:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication