Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom added to a67
12-07-17, 01:01 PM (This post was last modified: 12-07-17 02:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom added to a67
I currently have an inboard fishing boat with an a67 MFD, Airmar transducer and Raymarine digital (last generation) radar. I just purchased an Axiom 9 RV with RV-320 transducers to add to the mix. Both units have Navionics+. After installing the Axiom can I just network them together with a simple SeaTalkng cable to share radar and sonar data interchangeably across both? Does this give me the best installation or would installing a SeaTalkng network give advantages?

Thanks!
Find all posts by this user
Quote this message in a reply
12-07-17, 02:28 PM (This post was last modified: 12-07-17 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axiom added to a67
Welcome to the Raymarine Forum Gregg,

While it may be possible to interface these MFDs to one another via a SeaTalkng / NMEA 2000 network, then will be unable to share cartography, radar, fishfinder imagery, or other high bandwidth data requiring Ethernet communications. Please click here to view a FAQ addressing addressing interfacing Axiom and Axiom Pro MFDs with a/c/e/eS/gS-Series MFDs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)