Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Engine data to i70s
12-17-17, 08:13 PM
Post: #1
Engine data to i70s
Hey all. I have an Axiom 7RV. Connected my backbone I also have a Ray60 vhf, a fusion head unit and an i70s. I'll also be adding an itc-5 too utilize the sensors from my old st60 tridata.

I have engine data showing on a very old B&G Network Engine unit. Does anyone have any experience retrieving engine data from this type of system into the n2k network so I can see it on my i70s? I'd like to have all new instruments!

Oh, the engines are two Crusader 454 EFI.

Thanks for any help!
Find all posts by this user
Quote this message in a reply
12-18-17, 10:24 AM (This post was last modified: 12-18-17 10:25 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Engine data to i70s
Welcome back to the Raymarine Forum Brad,

Please click here to view a FAQ addressing this subject. In this case, I would recommend looking at the engine gateways from Fox Marine.
Find all posts by this user
Quote this message in a reply
12-18-17, 12:27 PM (This post was last modified: 12-18-17 01:34 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Engine data to i70s
Awesome, it looks like that's just what I need! Thanks for the information.

Brad
Find all posts by this user
Quote this message in a reply
12-18-17, 01:34 PM
Post: #4
RE: Engine data to i70s
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)