Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120w and E7d fishfinder using DCM300
03-25-16, 03:38 PM
Post: #1
E120w and E7d fishfinder using DCM300
Chuck,
From reading your last post it appears possible to set up a fish finding system using an E120w and a E7d. Currently I have both these units and a DCM 300, not sure of the transducer. The DCM is connected to the 120wand both units are connected through the back bone.
I do have the fish finder running on the E120w and depth shows up on the E7D although no fish finder.
How would I set the system up to the have fish finding capabilities on both units? you mentioned using a E66066 adapter cable?
thank you for your input!
Find all posts by this user
Quote this message in a reply
03-25-16, 03:46 PM
Post: #2
RE: E120w and E7d fishfinder using DCM300
Welcome to the Raymarine Forum Brent,

Unfortunately, it is not possible to do as you have suggested. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)