Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Axiom and older wheel pilot and displays
01-12-18, 11:06 PM (This post was last modified: 01-15-18 07:52 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) Axiom and older wheel pilot and displays
I'm hoping to go with and Axiom 9 and wondering if it will recognize and/or interface with my ST4000+ wheelpilot. If so, what features might I expect to get on the MFD ? I understand my ST60 displays will work with it as well should I choose to keep them ? Install is on a 36' sailboat built 2001

Thanks in advance for your help

Greg
Find all posts by this user
Quote this message in a reply
01-15-18, 08:01 AM
Post: #2
RE: (DG) Axiom and older wheel pilot and displays
Hi gregrohde@gmail.com
thank you for your enquiry.

The AXIOM 9 will interface with the ST4000+ through a SeaTalk to STng converter.

Further general details of systems using converters, can be found here .

The Converter will support the autopilot information, click here for further information.

However, the AXIOM will not control the ST4000+, only current Evolution autopilots can be controlled by AXIOM.

The basic method of operation is to build a route comprising multiple waypoints or even just a single waypoint, select the AXIOM to follow the route and steer to the waypoint (s), then engage AUTO on the ST4000+ and then engage TRACK mode, the ST4000+ will then follow the route on the AXIOM.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)