Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly 4 Pro w/ update 12.09 not working properly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 4 Pro w/ update 12.09 not working properly
04-14-16, 08:17 AM
Post: #5
Texas_Rig_N_Jig Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
RE: Dragonfly 4 Pro w/ update 12.09 not working properly
So I did some testing last night.

I have moved the transducer to the right of the motor as the prop turns to the right. I have mounted it in the location specified by the manual.

Unit is updated to latest software.

Unit now loses signal at around 25mph, then have to slow way down to get the sonar to start working again.

I have posted a video on my YouTube page so you can see what is going on.

https://www.youtube.com/watch?v=XPLEoRij...e=youtu.be
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dragonfly 4 Pro w/ update 12.09 not working properly - Texas_Rig_N_Jig - 04-14-16 08:17 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication