ES9 Interface with ST6001+
|
03-29-16, 02:56 PM
Post: #3
|
|||
|
|||
RE: ES9 Interface with ST6001+
The Course computer is a S3 Smartpilot
Label has E120550640131 as model/serial # I have read the referenced networking document. From what I can discern, it appears the S3 uses the more recent version of Seatalk. This should allow the AP to communicate with the ES9, via a ST to STng converter? If so, my intention was to relocate the ST6001+ below to the navstation and control the AP system from the ES9 MFD. Is this feasible? Thanks again! |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ES9 Interface with ST6001+ - dgulliver - 03-28-16, 04:43 PM
RE: ES9 Interface with ST6001+ - Chuck - Raymarine - Moderator - 03-29-16, 01:23 PM
RE: ES9 Interface with ST6001+ - dgulliver - 03-29-16 02:56 PM
RE: ES9 Interface with ST6001+ - Chuck - Raymarine - Moderator - 03-29-16, 03:57 PM
RE: ES9 Interface with ST6001+ - dgulliver - 03-29-16, 05:01 PM
RE: ES9 Interface with ST6001+ - Steve - Raymarine - Moderator - 03-31-16, 08:39 AM
RE: ES9 Interface with ST6001+ - dgulliver - 04-03-16, 02:37 PM
RE: ES9 Interface with ST6001+ - Steve - Raymarine - Moderator - 04-05-16, 02:07 PM
|
User(s) browsing this thread: 1 Guest(s)