Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axion/Navionics/Subscription
01-22-18, 06:22 PM (This post was last modified: 01-23-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axion/Navionics/Subscription
I've got the Axiom 9 home for the winter running on the bench. 3.2.101

I've got a Navionics card installed with Freshest Data.

I did a Factory Reset on the unit. The Axiom chart status (see attached) now tells me my Navionics subscription is not active. I then updated the card with the 'freshest' Freshest Data. The Axiom still says subscription not active.

Suggestions? Thanks.
Find all posts by this user
Quote this message in a reply
01-23-18, 01:30 PM (This post was last modified: 01-23-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axion/Navionics/Subscription
Welcome back to the Raymarine Forum danderer,

Is the Navionics chart card a Navionics+ chart card or is it a Navionics Platinum Plus chart card?
Visit this user's website Find all posts by this user
Quote this message in a reply
01-23-18, 01:52 PM (This post was last modified: 01-23-18 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] Axion/Navionics/Subscription
It is the Nav+ card that came with the MFD (NAG).

However.. this seems to have fixed itself. I can't say exactly what fixed it--since the initial report I've done a number of restarts, given the GPS good sky visibility, and switched (temporarily) to a demo chart downloaded from charts.raymarine.com. Somewhere in this process things got fixed so that my Nav subscription now is correctly detected.

Thanks.
Find all posts by this user
Quote this message in a reply
01-23-18, 03:08 PM (This post was last modified: 01-23-18 03:09 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA] Axion/Navionics/Subscription
danderer,

I'm glad to learn that the system is working. I suspect that there may have been a fault in reading data from the Navionics+ chart card.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)