Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Navionics Charts for A50
04-01-16, 07:41 AM
Post: #1
Navionics Charts for A50
I recently purchased a Platinum + card for my A50 and do not see any instructions in the A50 manual for insertion of new chart cards.

Could you please advise?

Will the A50 automatically revert to the originally supplied charts when the new Platinum card is not inserted?

Thank you
John
Find all posts by this user
Quote this message in a reply
04-01-16, 11:21 AM (This post was last modified: 04-01-16 11:22 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Navionics Charts for A50
Welcome to the Raymarine Technical Forum John,

Should a Raymarine MFD having internally pre-loaded Navionics Silver cartography be used with a chart card with which it is not compatible, then the MFD may indeed display the pre-loaded Navionics Silver cartography. When used with a compatible Navionics chart card, a Raymarine MFD having internally pre-loaded Navionics Silver cartography will defer to using the cartography stored on the chart card if it has a later publication date that that of the internally pre-loaded Navionics Silver cartography. For geographic areas outside of the coverage area of the compatible Navionics chart card, the MFD will defer to the internally pre-loaded Navionics Silver cartography. Please click here to view a FAQ providing further information on this subject. If the MFD's memory card reader is operational, then it would be recommended that Navionics be contacted to provide a compatible chart card for your MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)