Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] track function in Chart app of Axiom MFD
02-05-18, 09:59 AM (This post was last modified: 02-05-18 04:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] track function in Chart app of Axiom MFD
Hi,

If I turn on the "tracking" function in Chart/Map app (with Navionics card inserted) from my Axiom 9" RV100, then I switch out of the Chart app and open Sonar app. Would this switch stop my tracking in my Chart app?

Thanks.

http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
02-05-18, 04:41 PM
Post: #2
RE: [CA] track function in Chart app of Axiom MFD
Welcome back to the Raymarine Forum Ray18,

Q1. If I turn on the "tracking" function in Chart/Map app (with Navionics card inserted) from my Axiom 9" RV100, then I switch out of the Chart app and open Sonar app. Would this switch stop my tracking in my Chart app?
A1. Doing as you have suggested should not cause a track which as been started to be stopped.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)