Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] EGT Probe
02-12-18, 01:09 PM (This post was last modified: 02-12-18 02:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] EGT Probe
I have a C127 and am looking to Exhaust Gas Temperature Probes to 2 engines (Cummins QSM11). Is there a way to display the data from the probes on the C127 MFD? There are probes that use PNG 13316 (Enhanced by NMEA in 2/2015 for extended range temperatures). Maretron makes some that utilize this PNG. Has anyone gotten them to display on a C127, or know if it can be done? Suggestions? Recommendations?
Find all posts by this user
Quote this message in a reply
02-12-18, 02:36 PM (This post was last modified: 02-12-18 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] EGT Probe
Welcome to the Raymarine Forum MBIII,

Exhaust Gas Temperature is not among the engine data items supported by MFDs running the lastest version of LightHouse II software (i.e. a-Series MFDs, c-Series MFDs, e-Series MFDs, eS-Series MFDs, and gS-Series MFDs). Unfortunately, development of LighHouse II software ended with LighHouse II v19.03 and the a/c/e-Series MFDs do not have the processing power to support use of LightHouse 3 software. At this time, LightHouse 3 software also does not support this engine data item. Accordingly, should it be necessary to display this data item immediately then it would be recommended that a third party solution be sought. A feature suggestion will be submitted to consider addition of this data item to a future LightHouse 3 software update as well as the MFD software which may follow LightHouse 3.

Please click here more information concerning feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)