Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Problem with Lighthouse 3.3 and Navionics+
02-14-18, 08:31 PM (This post was last modified: 02-15-18 05:30 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) Problem with Lighthouse 3.3 and Navionics+
I have discovered that my Navionics+ chip does not work in my Axiom 12 Pro RVX with Lighthouse 3.3.170 I have reverted to Lighthouse 3.2.101 and the Navigation App with the Navionics+ charts functions normally.

Is this a known issue and if so, is there a planned release date for the fix?

Jon
Find all posts by this user
Quote this message in a reply
02-15-18, 05:32 AM
Post: #2
RE: (DG) Problem with Lighthouse 3.3 and Navionics+
Hi jkspain
Thankyou for your enquiry.

Sorry to hear of the issue that you have experienced, we have our engineering team investigate this issue and found that only some chart cards are affected in this way, we have identified a fix and this will be in the next software update.
regards
Find all posts by this user
Quote this message in a reply
02-15-18, 02:14 PM
Post: #3
RE: (DG) Problem with Lighthouse 3.3 and Navionics+
Hi Derek,

Glad a fix is in work. I know you are prohibited from promising an exact release date for the fix but can you give me an idea if the future release is weeks or months away or even later?

Thanks,

Jon
Find all posts by this user
Quote this message in a reply
02-16-18, 07:14 AM
Post: #4
RE: (DG) Problem with Lighthouse 3.3 and Navionics+
Hi jkspain

The next update is likely March, but it depends on testing and approvals . . . but it should be in the near future.
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)