Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) EV-100 Wheelpilot / NMEA 2000
02-22-18, 09:41 AM (This post was last modified: 02-22-18 12:22 PM by Derek - Raymarine - Moderator.)
Post: #1
(DG) EV-100 Wheelpilot / NMEA 2000
Have purchased a new EV-100 Wheelpilot. Already have installed a NMEA 200 backbone supporting wind, speed, depth, and chartplotter (all Garmin).

I believe I understand the Wheelpilot may be connected via the NMEA 200. Is it as simple as connecting via the NMEA 200 spur cable that is available from Raymarine?

Thank-you.
Find all posts by this user
Quote this message in a reply
02-22-18, 12:27 PM
Post: #2
RE: (DG) EV-100 Wheelpilot / NMEA 2000
Hi dsdraymarine
Thank you for your enquiry.

The NMEA2000 backbone used already will have devicenet connectors and so the Evolution autopilot can be connected to the backbone, via spur cables which have STng one end and Devicenet the other.
This link click here also look here too for FAQs which will give information regarding cables to use.
thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)