Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
02-28-18, 09:40 AM (This post was last modified: 02-28-18 09:48 AM by Derek - Raymarine - Moderator.)
Post: #8
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Adding E120 to Seatalkng Netwrok?
Hi Jeffg
Thank you for your feedback.
The E55054 cableconnections are as below . . . .
[Image: attachment.php?aid=1653]

Please note that SeaTalk has quite a different network structure than STng or NMEA2000. SeaTalk is a simple three wire system, ( Red = 12v, Shield/ bare wire = 0volt and Yellow is Data) and rather like a domestic ring main in a house, can be 'daisychained' from display to display, it can be connected in a ring main format or a simple end-to-end format and is very forgiving over length and multiple connection points. Reading this FAQ click here for access may also help shed more light on SeaTalk

STng or NMEA2000 is much more rigid in it's format and so has very specific rules about backbone, terminations and spur connections.

regards


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Adding E120 to Seatalkng Netwrok? - Derek - Raymarine - Moderator - 02-28-18 09:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication