Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
04-02-18, 02:55 PM (This post was last modified: 04-02-18 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #9
RE: (DG) Adding E120 to Seatalkng Netwrok?
Hi Derek,
I tried splicing the 6 wire Seatalk/Alarm Out wire to the Seatalk wire using only the Red Yellow and Bare wires. However, the E-120 still does not see my GPS and cannot make a fix.
The C80 works fine, but the E120 does not seem to be able to plug&play with the same connections.
Is there a way from the E120 to check the Seatalk network to see what is connected? Or at least if it sees the Seatalk network at all?
I have not had the time to map out the network connections on my boat, so I am at a loss as to what is actually connected to what. That, I am sure, will be a big project.
Thanks,
Jeff

Thanks,
Jeff Gardiner
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Adding E120 to Seatalkng Netwrok? - Jeffg - 04-02-18 02:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)