Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
07-18-18, 04:36 AM
Post: #18
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Adding E120 to Seatalkng Netwrok?
Hi Jeffg

Does the SPX work fine and steer a compass course OK? If yes, then you will need to check out the network and how everything is interconnected.

Check the E120 displays other SeaTalk data you have on the Network, for example Depth or speed? If yes, then the E120 is correctly connected to SeaTalk.

Check that the Autopilot control is enabled in the System integration menu, it could be this is why there is a cross through the Autopilot icon.

However, the progress further, we really need to know a system schematic, what is fitted, how it is connected and the full fault symptoms.
Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Adding E120 to Seatalkng Netwrok? - Derek - Raymarine - Moderator - 07-18-18 04:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication