Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
07-23-18, 10:50 AM (This post was last modified: 07-24-18 07:40 AM by Chuck - Raymarine - Moderator.)
Post: #22
RE: (DG11) Adding E120 to Seatalkng Netwrok?
HI Jeffg,

Assuming that the heading from the Autopilot is correct and that the heading is showing correctly on the MFD, once you have initated a GOTO on the MFD you should see the BTW of the new waypoint showing on the autopilot control head.

Usually, with an active Waypoint in the MFD, when you select TRACK mode, you would expect to see the autopilot start to turn the drive to initiate a turn onto the new track. In AUTO the pilot will just try to steer to the current heading .

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG11) Adding E120 to Seatalkng Netwrok? - Derek - Raymarine - Moderator - 07-23-18 10:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)