Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RV100 Frequency
03-04-18, 05:41 PM (This post was last modified: 03-05-18 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] RV100 Frequency
What frequencies does the RV100 pig at? I am installing two Axiom Pro RVX 12's with the RV100 transducer and also the B175H-W and M265LM. With such a wide band of frequencies with all these transducers, I am concerned that any one of these transducers could interfere with the RV100. Thanks.
Find all posts by this user
Quote this message in a reply
03-05-18, 10:15 AM (This post was last modified: 03-05-18 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] RV100 Frequency
Welcome to the Raymarine Forum Karlista,

Please click here to view a FAQ addressing this subject. One should expect minimal, if any, interference between a RV or DownVision transducer and high power CHIRP transducers. One of the advantages of CHIRP technology is that the transducers transmit across a range of frequencies rather than a fixed frequency. Accordingly, the chances of two CHIRP transducers pinging at the same frequency at exactly the same time are minimal.
Find all posts by this user
Quote this message in a reply
03-05-18, 01:29 PM (This post was last modified: 03-05-18 02:26 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] RV100 Frequency
Thanks Chuck for the reply. The only potential I see is for the the CHIRP Conical sonar transducer elements pinging around a 60 kHz range centered at 200 kHz. There could be a crossover of the frequencies with the B175H-W.
Find all posts by this user
Quote this message in a reply
03-05-18, 02:27 PM
Post: #4
RE: [CA] RV100 Frequency
karlista,

Again, our experience has indicated that one should expect minimal, if any, interference between a RV or DownVision transducer and high power CHIRP transducers.
Find all posts by this user
Quote this message in a reply
03-05-18, 03:37 PM (This post was last modified: 03-06-18 09:47 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA] RV100 Frequency
Thanks Chuck. Hoping to complete the project in two more weeks. I will share share some pics and results with the forum.
Find all posts by this user
Quote this message in a reply
03-06-18, 09:47 AM
Post: #6
RE: [CA] RV100 Frequency
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)