Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) spx 30 controller only drives one direction
03-07-18, 08:08 PM (This post was last modified: 03-08-18 07:06 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) spx 30 controller only drives one direction
My Raymarine autopilot has an ST6002 display and an smart pilot x30 controller. This system worked for the past 8 years and now suddenly will only turn the rudder in one direction. All connections have been checked as well as the operation and set up of the rudder indicator.

Any suggestions on what might cause this?

Richard
Find all posts by this user
Quote this message in a reply
03-08-18, 07:17 AM
Post: #2
RE: (DG) spx 30 controller only drives one direction
Hi rpackard

Thank you for your enquiry.

We would first suggest testing the drive unit click here for details

If the drive tests out OK, then check the connections to and from the SPX30 and if these are all OK,then the course computer must be suspect and should be returned to our service workshop for further investigation.

regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)