Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Axiom to C80 Classic adapter plates
03-06-18, 05:40 PM (This post was last modified: 03-07-18 06:55 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) Axiom to C80 Classic adapter plates
I've been investigating updating my boat from a C80 classic to one of the new Axiom units and was very happy to see that Raymarine is now listing an adapter plate for some of the Axiom MFDs:
http://www.raymarine.com/multifunction-d...cessories/

I see a C70 adapter plate listed, but there is no listing for my C80 (Classic) to any of the Axiom units. I'm considering an Axiom 7 or 9.

Why would Raymarine list the C70, but not the C80? Is the C70 adapter plate usable in my case if I already have a cutout for the C80 classic in my dashboard? The website doesn't have dimensions or drawings available online.

Thanks for any help!
Rich
Find all posts by this user
03-07-18, 07:00 AM
Post: #2
RE: (DG) Axiom to C80 Classic adapter plates
Hi imrich

Thank you for your enquiry.

Unfortunately this particular adaptor plate was a little delayed, it is now in production and so the AXIOM 9 adaptor plate bezel for the Classic C80/E80 is part number A80564.

regards
Find all posts by this user
03-09-18, 03:11 PM (This post was last modified: 03-09-18 04:21 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: (DG) Axiom to C80 Classic adapter plates
This is great news! I don't see it on your website yet, but now that I know it's a real product, I can look into a new Axiom!
Find all posts by this user
03-12-18, 05:46 AM
Post: #4
RE: (DG) Axiom to C80 Classic adapter plates
Hi imrich

You're welcome
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)