[CA] Sun cover for Axiom 7 MFD

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Keith,

Unfortunately, consistent use of terminology is important when seeking advice.
As you can see from the diagram below (an excerpt taken from the Axiom MFD Installation Guide), the Axiom MFD may be mounted in a pod by either surface mounting the MFD (not typically chosen for pod installations) or front mounting (typically recommended for pods).



The Suncover which you have purchased is for the Front Mount Kit. Per the final note in 3.4 Axiom 7 flush and surface mounting, of the Axiom MFD Installation Guide, the suncover provided in the box is for use in Trunnion bracket installations, when Surface mounting the product, accessory suncover R70527 is required.

It is recommended that the dealer be contacted to return the incorrect part (and request a return shipping label) and that the R70527 suncover be purchased if your MFD is surface mounted as shown within the diagram above.