[CA] Axiom Pro Heading Data from Autopilot

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] Axiom Pro Heading Data from Autopilot

03-22-18, 08:27 AM (This post was last modified: 03-22-18 11:22 AM by Kevin.)

Post: #3

Kevin

Junior Member

Posts: 24
Joined: Feb 2016
Reputation: 0

RE: [CA] Axiom Pro Heading Data from Autopilot

Software was updated to v3.3.170 after installation.

I should have been clear. I removed the first 0183 connection between the J300x and the AxiomPro. The ONLY 0183 connection is via the Actisense gateway.

The Data Source feature has been tried with Manual toggled On & Off and refreshed but no actual source for Heading shows up.

Attached are screenshots of the N2K Analyzer with "Received PGN" boxes open for both the i70s and the AxiomPro 16 showing the 127250 Vessel Heading PGN.

I've also taken a screenshot of the Maretron DSM250 emulator displaying the current Heading. This is the heading displayed on the Autopilot control head as well as the i70s but not available on the MFD (---).

Attached File(s) Thumbnail(s)