Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom Pro Heading Data from Autopilot
03-27-18, 08:07 AM
Post: #5
RE: [CA] Axiom Pro Heading Data from Autopilot
Kevin,

Per our conversation yesterday, I was successful in having a PC transmit NMEA 0183 sentence $APHDG,213.7,,,,*5FR (which you had captured from the third party autopilot) to an Axiom Pro MFD running LightHouse 3 v3.4.x beta software . The MFD was then able to display the corresponding heading value (214 degrees) as a data overlay within the MFD's Chart application. I then disconnected the PC serial data cable from the MFD's Power/NMEA 0183/Video input cable and then connected the leads of this cable to an Actisense NGW-1-STNG. After doing so, the MFD again displayed the corresponding heading value (214 degrees) as a data overlay within the MFD's Chart application. As the release of the LightHouse 3 v3.4.x software update is imminent, it is recommended that you wait for the release of this software before performing any additional troubleshooting.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Axiom Pro Heading Data from Autopilot - Chuck - Raymarine - Moderator - 03-27-18 08:07 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)