Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) st50 / st1 insturments feed to st70 mid e22105
03-23-18, 11:32 AM (This post was last modified: 03-23-18 11:50 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) st50 / st1 insturments feed to st70 mid e22105
first post, be kind.
stand alone depth, speed, wind cabled to st70
d,w, s work fine no data on st70 displayed
st70 powers up, scrolls, seems to work except no data displayed
stng/ st1 adapter cable connection from st50s to st70, no other connections to st70
your suggestions please
thank you
bucky
Find all posts by this user
Quote this message in a reply
03-23-18, 12:18 PM
Post: #2
RE: (DG) st50 / st1 insturments feed to st70 mid e22105
Hi bucky

Thank you for your enquiry.

Have you checked mastership? this is a setting in the ST70 set up and is used to enable the ST70 to bridge SeaTalk from the ST50 displays to STng and to display the SeaTalk data on the ST70. This MASTERSHIP setting is found in the advanced Options menu.

Regards
Find all posts by this user
Quote this message in a reply
03-23-18, 01:34 PM (This post was last modified: 03-23-18 02:03 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: (DG) st50 / st1 insturments feed to st70 mid e22105
thank you for reply,
have not tried mastership, but i will now.
thanks again
bucky
Find all posts by this user
Quote this message in a reply
03-26-18, 08:45 AM
Post: #4
RE: (DG) st50 / st1 insturments feed to st70 mid e22105
Hi bucky

You should be all set,

regards
Find all posts by this user
Quote this message in a reply
03-27-18, 09:50 PM
Post: #5
RE: (DG) st50 / st1 insturments feed to st70 mid e22105
found defective cabling, repaired, working fine now.
thanks again
bucky
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)