Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] P79
04-05-18, 03:20 PM (This post was last modified: 04-06-18 08:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] P79
I have a P79 connected to my MFD. After 5 or 6 hours the depth desapear and - - - show. If I switch OFF on ON again, all work fine for another 5 hours.
Any idea of the trouble: the MFD or the sensor?
Find all posts by this user
Quote this message in a reply
04-06-18, 08:42 AM
Post: #2
RE: [CA] P79
Welcome to the Raymarine Forum Herve,

What model MFD is installed onboard the vessel? Has the transducer been directly interfaced to the transducer socket of the MFD or to a fishfinder sonar module? If interfaced to a fishfinder sonar module, then please state the model of fishfinder sonar module which it has been interfaced to. How thick is the hull of the vessel? What was the chart depth area when the problem occurred? Please additionally specify whether the problem occurred while the vessel was operating at speed, was trolling, or was drifting/anchored.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)