Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] axiom navionics fishing depth
04-24-18, 09:54 AM
Post: #6
RE: [CA] axiom navionics fishing depth
shewstring,

The following response applies to Axiom, Axiom Pro, and eS/gS-Series MFDs running LightHouse 3 v3.4.66 and later software. When deep water is configured to be displayed as white three colors of shading are supported from deep to shallow. The Deep Water setting may be configured in depth increments as low as five feet. Waters deeper than the Deep Water From setting will be colored white. Waters less than the Deep Water From setting to zero feet will be colored in two shades, light blue (deeper water inside of the Deep Water From setting) and dark blue (shallow water inside of the Deep Water From setting). Areas exposed by low tide and covered by high tide will be colored green. There is an additional setting titled Shallow Area which may be configured in one foot increments to denote shallow areas necessitating greater caution. No finer means are supported for denoting depths within the shallows.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] axiom navionics fishing depth - Chuck - Raymarine - Moderator - 04-24-18 09:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)