Thread Closed 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
04-16-18, 09:34 AM
Post: #1
When in auto mode the 10 and 1 keys are selected together to tack, the pilot will default to a turn angle of 90 degrees. In some installations or for some types of vessel, you may want to change this to a smaller or a larger angle to make sure the vessel makes the tack successfully,of course the heading can be trimmed afterwards.

Note: this is applicable only when not in wind mode.

This angle setting can be adjusted in calibration by ensuring CAL LOCK is set to OFF and then the AUTO TURN angle is adjustable in the DRIVE settings menu.

Find all posts by this user
Thread Closed 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)