Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom RV Ping Rate
04-16-18, 01:01 PM (This post was last modified: 04-19-18 01:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom RV Ping Rate
I just have a quick question about ping settings on the standard Axiom unit. In the updated operation manual it shows an option to switch the unit to hyper ping. My unit is not giving me that option. I have version 3.4.66 so it should be the latest software. I do have the option to go from 1 to 100. Am I missing something or is it an error in the literature?
Thank you.

Bill
Find all posts by this user
Quote this message in a reply
04-19-18, 03:16 PM
Post: #2
RE: [CA] Axiom RV Ping Rate
Welcome to the Raymarine Forum Bill,

I have no information at present indicating that the Hype ping Sonar setting did not make it into the v3.4.66 software update. However, it may only be used in depths less than 6m and boat speeds up to 40kts. Hyper ping should be used
When the depth reaches 6 meters or above, then the ping rate will automatically reduce to normal until depth conditions are met. That said, the menu within my office system has the numerical type ping rate which you described. I will review this issue with the program manager and will respond regarding with my findings. At that time, this post will be updated accordingly.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)