Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RayNet to STHS Connection
04-05-16, 09:17 AM
Post: #2
RE: RayNet to STHS Connection
Welcome to the Raymarine Forum John,

Should the system feature an Ethernet Switch (ex. HS5 RayNet Network Switch, SR6 (retired), or SeaTalkHS Network Switch (retired), then no crossover coupler would typically be used. If replacing a SR100 with a SR150 and a SeaTalkhs Cable already be installed for the SR100, then this cable may then be adapted (w/A80160 SeaTalkhs (F) to RayNet (F) Adapter) to mate to a SR150's Network socket. If replacing a SR100 with a SR150 and installing a new cable, then an appropriate length of RayNet (F) to RJ45 Cable would be used to interface the SR150's Network socket to the SeaTalkhs Network Switch.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RayNet to STHS Connection - John Pecora - 04-04-16, 05:58 PM
RE: RayNet to STHS Connection - Chuck - Raymarine - Moderator - 04-05-16 09:17 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)