Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Use of self leveling radar mounts
04-04-16, 07:31 PM
Post: #1
Use of self leveling radar mounts
I have a self leveling mount by Scanstrut, model LMM-1. It is marketed as compatible with Raymarine domes 18" and 24" models RD418HD and RD424HD. The mount however does not have sufficient reach to prevent mechanical interference between the dome and the mount unless the dome is reversed, electrical plug facing forward. Can the unit be operated in this manner by sufficient adjustment to the heading correction? I am also working on a solution with the supplier of the mount. I think the reversing of the dome is not a good idea but affirmation from Raymarine will help my case with the supplier of the mount.
Find all posts by this user
Quote this message in a reply
04-05-16, 11:03 AM
Post: #2
RE: Use of self leveling radar mounts
Welcome to the Raymarine Forum Don,

It is indeed possible to do as you have suggested. As you have indicated, the radar bearing alignment configuration setting would need to be configured to match to proper alignment of the radome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)