Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] DSM30/Airmar/E120 Fault Isolation
05-20-18, 08:35 AM (This post was last modified: 05-30-18 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] DSM30/Airmar/E120 Fault Isolation
Thank you for responding. I have gone through all of the FAQ info and double checked my system...connections, power levels, etc. Everything checked out. I have noticed though that if I do a DSM reset, that the depth finder will eventually settle and give a good and correct reading. Then after a while, it (the picture on my E120) will go haywire and the depth reading will disappear. See photos. So, maybe it's my DSM but rather than purchase a CP370 at almost $600, I'm thinking a used DSM30 for $125, to see if that's my problem is a less expensive approach.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-20-18 08:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)