[CA11] DSM30/Airmar/E120 Fault Isolation

Thread Rating:

1 Vote(s) - 5 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA11] DSM30/Airmar/E120 Fault Isolation

05-27-18, 06:05 AM

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA] DSM30/Airmar/E120 Fault Isolation

mistertj,

No need to delete software from the MFD. The DSM need simply be replaced with the CP370. The currently installed Ethernet cable will be adapted with an A80160 SeaTalkhs (F) to RayNet (F) Adapter. It is recommended that all E-Series Classic MFDs be operating with the final E=Series Classic MFD software update, v5.69.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 04-23-18, 07:04 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 04-26-18, 12:56 PM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-20-18, 08:35 AM

RE: [CA] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-21-18, 08:08 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-25-18, 04:43 PM

RE: [CA] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-27-18 06:05 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-30-18, 09:59 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-30-18, 10:32 AM

User(s) browsing this thread: 1 Guest(s)