Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] radar not displaying on chart (eS128)
04-24-18, 11:49 AM (This post was last modified: 04-25-18 10:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] radar not displaying on chart (eS128)
The radar (quantum) is on and showing images in the radar screen. Going into chart, radar /AIS, show radar, there is no radar overlay showing on the chart. AIS targets are showing on the chart.
Find all posts by this user
Quote this message in a reply
04-25-18, 10:45 AM (This post was last modified: 04-25-18 10:48 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] radar not displaying on chart (eS128)
Welcome to the Raymarine Forum wknudsen,

Sources of heading (not to be confused with GPS COG) data include autopilots, instrument heading sensors, etc.. Has the eS128 been interfaced to a source of heading data? If so, ensure that the device which supplies the system with heading data switched ON and that the Heading data item is populated when attempting to overlay the chart with radar. Should the system not be interfaced to a source of heading data, then please click here to view a FAQ addressing under what conditions the radar imagery may be layered atop the cartography displayed within the Chart application using GPS COG.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)