The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] Axiom 9-C90w-C120- Airmar b744v

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9-C90w-C120- Airmar b744v
04-25-18, 03:11 PM (This post was last modified: 04-27-18 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
Rcfiftyone Offline
Junior Member
**
 		Posts: 4
Joined: Apr 2018
Reputation: 0
[CA] Axiom 9-C90w-C120- Airmar b744v
I currently have installed on my boat the C90w and C120 linked via dsm300 to and Airmar b744v transducer. I just purchased the Axiom 9rv and RV-200 transducer. My question is can I link the b744v transducer to the axiom via Y cable or does it have to be run through the dsm300? I think my dsm300 may be shot. Havent had time to diag it yet but I wanted to see if it was even worth doing. Is there an advantage to running both transducers?

Also, can I link my C series units to the new axiom via seatalk or nema2000 or older version without dsm 300? What functionality could I gain by doing this? Thanks in advance for your time.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom 9-C90w-C120- Airmar b744v - Rcfiftyone - 04-25-18 03:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication