Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Any need to change My eS128/eS97 from Lighthouse II to Lighthouse III?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Any need to change My eS128/eS97 from Lighthouse II to Lighthouse III?
04-26-18, 04:24 PM (This post was last modified: 04-26-18 04:26 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Any need to change My eS128/eS97 from Lighthouse II to Lighthouse III?
Welcome to the Raymarine Forum Mike,

he requested information if available through a Compare LH 2 and LH 3 Features link found on the LightHouse 3 for eS/gS-Series MFDs web page. At this time, the primary reason that a customer will be updating an eS/gS-Series MFD form LightHouse II to LightHouse 3 would be to interface an Axiom or Axiom Pro MFD with the system. Through software updates occurring through 2018, it is expected that the most of the remaining major features of LH 2 will be implemented in LH 3. At that time, all owners of eS/gS-Series MFDs may want to consider the features and benefits of LightHouse 3.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Any need to change My eS128/eS97 from Lighthouse II to Lighthouse III? - Chuck - Raymarine - Moderator - 04-26-18 04:24 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication