Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
0.5 L Hydraulic pump spec discrepancy
07-26-16, 01:34 PM
Post: #23
RE: 0.5 L Hydraulic pump spec discrepancy

The other thread which you have mentioned did not include any additional pertinent detail and will be deleted accordingly. While this thread is no diverging from it's original subject, we'll finish the discussion here. As indicated previously, sensed motion motion of the vessel is a critical part of the operation of this autopilot. Rather than speculate that something may be wrong, you may want to perform the drive motor test specified previously (i.e. motor lead momentarily connected directly to a 12VDC source). If the pump does not perform properly during the test, then create a new thread to discuss the pump problem. However, should the test not identify a problem with the pump, then the vessel should be taken out to permit it to determine the vessels handling characteristics and determine the deviation fields sensed by the EV-1 Sensor Core.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: 0.5 L Hydraulic pump spec discrepancy - Chuck - Raymarine - Moderator - 07-26-16 01:34 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)